Bathroom Plumbing Maintenance You Can Do Yourself 

Here at Rooter Hero Plumbing & Air, we’ve put together a guide highlighting some simple yet effective plumbing maintenance tasks that will keep your bathroom functioning smoothly.

1.    Check for Leaks

Leaks may start small, but they can cause a lot of damage over time if left unnoticed. Take a few minutes every few months to inspect the pipes under your sink, around your shower, and behind your toilet. Check for any signs of moisture, dampness, or water stains, which can be a clue that something’s wrong. Even a small drip from a faucet can waste gallons of water a day. Tighten any loose connections, or replace a worn-out washer to prevent bigger issues. For major leaks, seek help from an experienced emergency plumbing company. 

2.    Clear Drains

A clogged drain is more than just a nuisance—it can lead to water damage if it gets bad enough. If your sink or shower is draining slowly, it’s usually a sign of buildup, especially hair or soap scum. To fix it, grab a plunger or a drain snake to clear the blockage. For regular maintenance, try pouring a cup of baking soda followed by vinegar into the drain, and flush it with hot water. It’s a natural, easy way to keep things flowing smoothly. If you encounter a severe clog, reach out to a professional plumbing company for professional drain cleaning.

3.    Clean Aerators

Over time, mineral deposits can build up in the aerators on your faucets, causing weak water pressure or uneven flow. Luckily, cleaning them is simple and doesn’t require any special tools. Just unscrew the aerator from the faucet, soak it in a vinegar solution for an hour or so to dissolve the minerals, then rinse it thoroughly. Reattach it, and you’ll notice better water flow. This simple task is a great way to keep your faucets working efficiently without spending money on replacements.

4.    Inspect Toilet Seals

The wax seal at the base of your toilet helps keep everything sealed tightly, but it can wear out over time. If you notice water pooling around the base of the toilet or smell something unpleasant, it could be a sign the seal is compromised. Replacing the seal isn’t as hard as it sounds, and it’s a task you can tackle yourself with a few basic tools. Fixing this not only keeps your bathroom dry but also prevents water damage to your floors.

5.    Check Water Heater Temperature

Setting your water heater at the right temperature is crucial for both safety and energy efficiency. If it’s set too high, you risk scalding yourself or wasting energy, while a lower setting might leave you with cold showers when you need them most. The sweet spot is around 120°F. To check, use a simple thermometer in your hot water to ensure it’s within range. Adjusting the temperature can save you money on your utility bills and prevent any unfortunate burns from overheated water. If your water heater is acting up, call a trusted plumbing company in Alder Creek, CA to make repairs.

Reach out to Rooter Hero Plumbing & Air for all of your bathroom plumbing needs. From showerhead replacement to drain cleaning, toilet repair, and emergency plumbing, we do it all.