Call This Tuesday to Get $50 OFF

Valuable Dishwasher Repair Tips

July 10 / 2019

A dishwasher is a life saver, after an exhausting day of preparing a meal for guests, the last thing you want to do is manually wash all those dishes. Luckily you can toss them into the washer and it will do it for you. But what do you do when it stops working? Well, before you call in the repairman, you may want to try out these repair tips.

The Washer Does Not Run

The first fix would be to see that the power switch is actually on, next check that it is plugged in, if both are done and there is still no life, check that the door is shut well. Now if that does not fix the problem, look for the reset button and reset it. The next possibility is that the circuit breaker has been tripped. Turn the fuse switch off and then on again. Or you can replace the fuse. If all these still fail to get the washer started, call the appliance support team, the problem is beyond your ability.

Water Doesn’t Stop Flowing

If the water is unable to stop flowing automatically, there is a problem with the float switch. If the switch is not working then you may need to replace it. It is important that you know how a washing machine works to be able to do this.

Dishwasher RepairThe Water Doesn’t Drain Properly

If instead of draining the machine is spewing dirty water, there is possibly a clog sometimes this is caused by a newly installed garbage disposal that is not working well. Go back to the instructions for installation of garbage disposals and see what you may have connected wrongly. It could also be caused by clogging in the drain hose. Open the air gap and use a stiff wire to clear out the passage.

Dishwasher Leak

If you experience water sipping out at the base of the washer, the problem may be caused by the amount of detergent you are using. Reduce the amount of detergent and that should help. If the detergent is not the problem, check if you may be overloading the machine. Or the dishes may be loaded badly which is preventing the door from closing properly. You can also check if the washer is on leveled ground, if it is tilted, leaking can occur. Also, check if the hose may be faulty.

Prevention is the Best Cure

While you may try to fix problems that occur, it is best to prevent them altogether. Here are some tips to prevent problems occurring.
  • Clean the dishwasher well and deodorize it, make sure food does not get stuck in the drain
  • Avoid putting more dishes than the recommended amount. An overfilled washer will leak
  • Repair dishwasher racks to prevent the rusting. Rusted racks will break off and affect the motor
  • Clean the washer filter regularly, the filter is a vital part of the machine and needs to be clean to function well
It is also important to observe safety as you attempt to fix a fault. Before touching any internal or electrical parts, ensure the machine is off from the main switch and at times you need to wait some time if it has just been running. Read your instruction manual before you try to fix any problems or discuss with our experts today!

Drain Camera Inspection